Cisco ASA Device Manager

Hi all,

working with a Cisco firewall (PIX / ASA) we can get lost in the CLI to make our job a bit easyer we can use the GUI management tool provided by Cisco - the ASDM.

enabling this is very simple, two steps
First enable the feature and configure the port on witch the Cisco will listen to requests
http server enable 4430
In my case i wanted to use port 4430

allow access for the end Host / Network
http 10.10.10.0 255.255.255.0 inside
so basically i allow all host's coming from 10.10.10.0/24 to access the ASDM (as long as they arrive via interface 'inside' ).


Hope this post was helpful, If it was please consider a donation:
BTC Address: 1CnyMpjd1RntRDxSus2hu2aDMyzL4Kj29N

LTC Address: LUqrKbzGihTU2GEnL3EwsuuLHCsxCJMdtR